jiuguang-fd-954z-954dh-led-light-bar-poster
JIUGUANG

Off-roadlighting.

Direct from JIUGUANG

Get product options
& wholesale pricing.

Tell us what you want to stock or customize. We’ll help you choose the models and quote your order.

Custom logos, mounts and wiring available.

* Name cannot be empty!
* Please enter a valid phone number.
* Please tell us what you need so we can quote accurately.

Your details will be used to respond to this inquiry.

Products Categories
Featured Products

LED Work Lights

Heavy-Duty Flood, Anti-Glare & Amber Strobe LED Work Lamps for Construction Machinery, Trucks & Tractors

Explore industrial-grade LED work lights for excavators, loaders, utility trucks, tractors and forklifts—including wide flood lamps, anti-glare cutoff work lights, amber strobe warning work lights and amber position-light models.

For jobsite and fleet procurement, selection goes beyond claimed wattage. Compare measured effective lumens (zero thermal derating on 10-hour night shifts), 9–32V / 9–60V DC multi-fleet voltage, ECE R10 radio-quiet EMC, shockproof stainless brackets, Deutsch (DT) connectors and IP68/IP69K washdown sealing.

Products
JOBSITE, FLEET & AGRICULTURAL WORK LIGHT ARCHITECTURE

How to Specify LED Work Lights for Excavators, Utility Trucks, Tractors & Jobsite Fleets

On active construction sites, mines and night farms, work lamp failures and operator glare directly impact safety and machine uptime. Match the optical pattern and circuit configuration to each equipment zone (see our Work Light Beam Pattern Guide, or if you need high-speed highway throw, check our best driving lights buying guide):

01 / WIDE FLOOD & TRACTOR SERIES

High-Lumen Task & Implement Coverage

Delivers uniform, hotspot-free close-range illumination for cab roofs, excavator buckets, service beds and wide tractor implements—led by our 5.5" 40W 2,970 LM oval tractor work light (1 Lux @ 80 m) with ADC12 thermal fins for 10-hour night shifts.

02 / ANTI-GLARE CUTOFF SERIES

Zero Ground-Crew & Boom Reflection

On multi-crew jobsites, roadworks and warehouses, our anti-glare LED work lights use stepped reflectors and optical cutoff lenses to keep intense light on the ground without blinding spotters, riggers or oncoming drivers.

03 / AMBER STROBE & POSITION SERIES

2-in-1 Hazard Warning & Clearance DRL

Consolidate task lighting and hazard signaling with LED work lights with amber strobe for tow trucks, snowplows and municipal fleets, or choose amber position-light work lamps for road-transit marker visibility.

OEM / ODM & FLEET WHOLESALE SUPPLY

Direct Industrial LED Work Light Manufacturing at JIUGUANG

JIUGUANG manufactures heavy-duty LED work lights, mounting brackets and multi-circuit switch panels in our 15,000 m² facility with 13 production lines, 200+ employees, and in-house die-casting, CNC hardware, injection-molding and SMT workshops. We help equipment OEMs, upfitters and fleet distributors standardize SKU inventory with 9–32V / 9–60V DC wide-voltage drivers, waterproof Deutsch (DT) connectors, custom laser-etched logos and E-mark / ECE R10 EMC documentation.

9–32V / 9–60V 12V, 24V & 48V Fleet Standardization
IP68 / IP69K Concrete, Mud & Hot-Wash Sealed
ECE R10 EMC Zero Site-Radio & GPS Interference
15,000 m² In-House Factory & 13 Lines
JOBSITE PROCUREMENT FAQ

Clear Answers on Industrial LED Work Lights

Direct engineering answers on measured lumens vs. fake wattage, ground-crew glare control, 12V/24V/48V fleet voltage, hydraulic breaker vibration, and ECE R10 radio shielding.

Ask An Engineer →

Many cheap work lights claim "200W–300W" but dim quickly—how do you rate lumen output and prevent thermal derating on 10-hour night shifts?

+
Inflated "theoretical wattage" is one of the biggest procurement pitfalls in jobsite lighting. We specify our work lights by actual power draw and integrating-sphere measured lumen output (for example, our 40W 970-ZH-8 oval work light delivers a verified 2,970 LM and 1 Lux @ 80 m). Heavy-wall ADC12 die-cast aluminum housings with deep convection cooling fins and constant-current thermal management maintain full brightness across continuous 10-to-12-hour night shifts in −40°C to +85°C environments.

How do we prevent cab- or boom-mounted work lights from blinding ground crew workers or reflecting off excavator booms?

+
For solo open-field machinery, standard wide flood work lights provide maximum overhead and perimeter spread. However, on multi-worker construction sites, road paving zones or loading yards where spotters and riggers walk near the machine, choose our anti-glare cutoff LED work lights. Their stepped reflectors and fluted optical lenses project a clean horizontal cutoff that keeps light below eye level and prevents glare off hydraulic booms and cab windshields.

Can we standardize on a single work light SKU across 12V service pickups, 24V excavators/dump trucks and 48V forklifts?

+
Yes. To help equipment rental fleets and distributors reduce spare-part SKU inventory, our work lights feature wide-voltage 9–32V DC or 9–60V DC drivers with built-in reverse-polarity and alternator load-dump surge protection. A single 9–60V DC model operates seamlessly across 12V utility trucks, 24V heavy excavators/tractors, and 36V/48V electric warehouse forklifts.

How do your work lights hold up against hydraulic breaker vibration, cement slurry and daily IP69K hot-water washdowns?

+
Jobsite equipment subjects lamps to continuous high-G shock and corrosive mud or concrete washdowns. Our work lights combine impact-resistant polycarbonate lenses, reinforced stainless steel mounting brackets, pressure-equalizing breather vents, and IP68 / IP69K ingress protection with integrated waterproof Deutsch (DT) connectors—preventing bracket fatigue and internal moisture condensation during high-pressure steam cleaning.

Will these LED work lights interfere with jobsite VHF/UHF radios or 3D GPS grading and tractor guidance systems?

+
No. Unshielded aftermarket work lights frequently cause static on site dispatch radios and disrupt RTK/GPS machine-control receivers on graders, dozers and tractors. Our LED work lights are engineered to meet ECE R10 electromagnetic compatibility (EMC) standards. Contact us with your target models, connector requirements and order volume to confirm ECE R10 documentation, custom laser branding and sample availability.