Leave Your Message

Side Shooter Led Pods 5 Inch

- No darkness 2 sides with side shooter beam angel 270°;
- High power output 122W, 20600lm, 650M shooting;
- IP68 waterproof, with military breather, pass airtightness test;
- Strong heat dissipation performance, 6063 die cast aluminum shell;

    Model

     JG-F996DZ-5

    Size

     5 Inch

    Voltage

     9-32V DC

    Power

     122 watts pair

    Chip

     Osram P9 chips

    Lumen

     20600lm pair

    Beam

     Combo driving beam with side shooter

    Color Temperature

     6000K

    Lens color

     Clear, Yellow

    Waterproof rate

     IP68

    Material

     Die-casting aluminum alloy housing

    Life Span

     50000+hours

    Cover

     Yellow/ Transparent

    Make an free consultant

    Your Name*

    Phone Number

    Country

    Remarks*

    reset

    - P9 HIGH POWER LEDs, with a straight reflector cup capable of outputting 80° spot driving beams.
    The straight-line illumination distance of 650M, a width of up to 45M, a pair of lights with a lumen value of up to 20600LM. 
    - NO DARKNESS of 2 sides. With side shooter beam 2 sides, around 20W high power output. This upgrade would offer drivers a 270° widest beam angle of sighting for high speed driving in darkness. And with sufficient brightness within the 650m range, the driver has enough braking time in the event of an accident during high-speed off-road driving.
    - Strong heat dissipation performance. The lamp housing is made of 6063 die cast aluminum material, which has an excellent circuit scheme and is equipped with a temperature control chip. 
    In addition, the thickened lamp body design effectively improves the heat dissipation efficiency, which is 150% higher than that of ordinary cube pods. 
    At the same time, the extremely fast heat dissipation speed greatly reduces the light attenuation caused by long-term operation of the chip, resulting in insufficient brightness and prolonging the service life of the lamp.
    - Equipped with high grade breathing hole design, each lamp has undergone nitrogen filling testing to ensure that each lamp body is sealed. The design of breathing holes can effectively solve the heat generated inside the lamp body under high-power operation, form air convection, and dissipate heat.
    - Each pair of light packs contains 3 Pin Deutsch wire harness, which can be easy instaaled with plug and play.

    69nr7yoe8jl7
    9rnx10b6111zju
    124k613y6l14o6j
    15at516cdi