D001-9 9 Inch Round LED Driving Lights with White DRL
| Model | D001-9 | Size | 9 inches |
| Power / pair | 198W | Lumens / pair | 13,000 LM |
| Voltage | DC 9–32V | LEDs | OSRAM |
| Beam | Spot driving beam | Beam reach | 1lux@1400m |
| Main light | White | Color temperature | 6500K |
| DRL | White; separate feed | Lens options | Clear / yellow |
| Waterproof | IP68 | Lifespan | 80,000 h |
| Housing | Die-cast aluminum | Breather | Pressure-balancing vent |
| Bracket | 312 stainless steel | Adjustment | 60° |
| Width | 228 mm | Height with bracket | 241 mm |
| Body depth | 70.5 mm | Mounting footprint depth | 85.3 mm |
A Larger Round Driving Light for Front-End Mounting
The D001-9 9 inch round LED driving lights suit bumper and bull-bar positions with room for a larger reflector array. The 228 mm wide body combines white forward lighting with a slim white DRL along its lower edge. Power and output are 198W and 13,000 LM per pair.
For a tighter installation, compare the D001-7 7 inch LED driving lights with white DRL. The smaller model measures 178 mm wide and reaches 1lux@1200m.

Deep Reflectors and 1lux@1400m Reach
The OSRAM LED reflector array uses individual deep cups to direct the main beam ahead. Its driving pattern combines a concentrated center with surrounding light. Beam reach is 1lux@1400m, while the main white light has a 6500K color temperature.

Separate White DRL and Main-Beam Connections
The lower white DRL has its own electrical feed, separate from the driving beam. Clear and yellow lens options are available for different light-color preferences. Choose the required lens when ordering, with the white DRL and main-light connections kept separate for installation.

IP68 Housing with a Pressure-Balancing Breather
The IP68 sealed housing uses rubber rings around the lamp assembly and cable interface. Its die-cast aluminum body and rear fins provide passive heat dissipation. A pressure-balancing breather helps manage pressure differences inside the enclosure. Service life is 80,000 hours.

60° Adjustment for the Installed Beam Angle
A 312 stainless steel bracket allows 60° of adjustment to suit the mounting position. Aim the lamp after securing the mounting base, then tighten the side fasteners. The adjustment gives installers room to align the forward light when bumper height or bull-bar position differs between vehicles.

Check Dimensions Before Choosing the Mount
The 228 mm wide lamp measures 241 mm high with its bracket. Body depth is 70.5 mm; the mounting footprint extends to 85.3 mm. Allow additional clearance for the rear cable and adapter. Compare these dimensions with the available mounting area before arranging a two-light or multi-light installation.


Frequently Asked Questions
Are the power and output figures per lamp or per pair?
The ratings are 198W and 13,000 LM per pair.
What voltage does D001-9 use?
D001-9 operates on DC 9–32V. Match the supply and wiring to the lamp before installation.
Can the DRL work separately from the main beam?
Yes. The white DRL and driving beam have separate electrical feeds.
How does D001-9 compare with D001-7?
D001-9 is 228 mm wide with 1lux@1400m reach. D001-7 is 178 mm wide with 1lux@1200m reach.
Do you sell by carton?
Yes. Send the model and required quantity so we can confirm carton packing and order arrangements.
Request a D001-9 Quote
For wholesale LED driving lights, send the required model, quantity, beam or color preference and application vehicle.
Contact UsMake an free consultant












